Why this answer matters
A single bad switch can be isolated from PCB/firmware problems on a hot-swap board. Wireless and wired behavior can also be compared before assuming a key matrix failure.
1 requirements3 verification steps1 primary source
Requirements
What has to be true
- Compatible 3-pin or 5-pin mechanical switch when swapping.
Verify it yourself
Use this test sequence
Change one variable at a time so you know which requirement made the difference.
- 1
Use a raw keyboard/chatter test to identify the exact key.
- 2
Compare wired and wireless behavior.
- 3
For a single persistent key, inspect/reseat or substitute a known-good compatible switch before escalating.
Limits
What this answer does not prove
- Hot-swap does not make every switch type electrically/mechanically compatible; follow Razer's stated compatibility.
Relevant DeviceOK checks