Start with a clean baseline
Separate enumeration, permission, actual video frames, active resolution/frame rate and source/capture format. 'Detected' is not the same as 'working correctly.'
Live evidence
Relevant checks
Webcam TestOpen your webcam locally to verify that the browser can access and display a live camera stream.
→Webcam Resolution TestCheck the active video track resolution your browser receives from the camera.
→Webcam FPS TestEstimate the actual delivered webcam frame rate.
→Webcam Snapshot TestCapture a still image locally from the active webcam.
→First sequence
Do the high-signal checks before risky changes
- 1
Open any physical privacy shutter
- 2
Close other apps using the camera
- 3
Run DeviceOK webcam test
Decision points
What the result should change
If live preview worksPrioritize the affected meeting/streaming app, selected source, virtual camera or profile.
If video works only at a lower modePrioritize cable/USB bandwidth, hub/dock topology or unsupported source mode.
If no frames arrive anywhereSimplify to direct connection, OS recognition and official firmware/driver guidance.
Browser can help check
- Open a live video stream
- Report active video settings
- Switch between browser-visible cameras
Browser cannot prove
- Inspect camera sensor electronics
- Repair firmware
- Measure optical calibration professionally
Repair boundary
Know when to stop browser troubleshooting
- A browser cannot diagnose image-sensor electronics or lens alignment.
- Capture cards can be limited by HDMI format/HDCP/EDID even when USB enumeration succeeds.
- Do not install unsigned camera/capture drivers from download aggregators.
Used-device inspection
What to verify before paying or signing off a repair
- Verify the exact resolution/FPS modes you need
- Test microphone if integrated
- For capture devices, verify passthrough and capture are separate specifications