DeviceOK
SearchDevice checks
Home / Devices / Ubiquiti
Independent Ubiquiti diagnostics

Test common Ubiquiti device functions before changing drivers or firmware.

Use DeviceOK client-side network evidence first, then continue in the UniFi management and support layer for AP, switch, gateway, VLAN, PoE and RF telemetry the browser cannot access.

Relevant tests

Start with evidence

Browser Online Status TestCheck the browser online state, available connection hints, and a short round trip to DeviceOK.
→
Browser Latency TestMeasure several browser-to-DeviceOK request round trips as a quick connection responsiveness check.
→
Browser Network Timing Variation CheckRun repeated HTTP round trips to DeviceOK and show timing variation between samples.
→
Network Information CheckRead browser-exposed connection type, estimated round-trip time, downlink, Save-Data state, and online status where supported.
→
Coverage

Device families

UniFi gateways, access points, switches, cameras.

DeviceOK does not publish a model page until it has model-specific data, a relevant test/diagnostic path, and authoritative sourcing. This brand hub is the safe entry point while the model knowledge graph grows.

Verified model centers

Model-specific diagnostics

Ubiquiti UniFi U7 ProKeep U7 Pro's 2.5GbE uplink and PoE+ requirement separate from Wi-Fi client rate, browser latency and internet throughput when diagnosing a network path.
→
Ubiquiti UniFi U7 Pro MaxDiagnose U7 Pro Max client/network symptoms without confusing its radio aggregate rates with the single 2.5GbE uplink or endpoint internet speed.
→
Exact compatibility answers

Ubiquiti requirements and fit questions

Does UniFi U7 Pro use 2.5GbE and PoE+?Yes. Ubiquiti's U7 Pro tech specs list a 2.5 GbE uplink and PoE+ power method.
→
What Ethernet uplink and PoE does UniFi U7 Pro Max require?Ubiquiti specifies a 2.5 GbE uplink and PoE+ power method for U7 Pro Max.
→